Nissan Radio Codes

When ON, the radio display will show CODE. Enter 3 incorrect codes into the system, pressing "OK" to confirm each. Upon the third attempt, your radio will show "system is locked for 60 minutes" & display the information needed to decode your radio. You need the `Serial number`, `Device number` and `Date`. this will show on the radios display. Please see the image for reference. Make note of all the information, you need this when ordering your decode. Ensure the date is entered as displayed on your screen, any radios that show a display date as 30.39.30 cannot be decoded by us, unfortunately.

Turn the ignition switch ON. `RADIO CODE` will show on-screen. Enter an incorrect code 3x times. For example, enter 1-2-3-4. The `Serial number`, `Part number` and `Date` will display on the radio. See image for reference. Make note of these numbers, and copy the date as it is displayed on-screen.

To get your serial number for the Nissan Clarion radio you must take the radio out. It is quite simple to do so. You will need a prying tool or flat-head screwdriver for prying the panels off the dash to access the radio.

Once removed, your radios label should say:

Model Number - PP3001 Serial Number - PP3001 0771234 It could also be a 14 character long CLxxxxxx0768345 number where the last 7 digits start with a `0`

Removal video guide attached.

To get your Nissan Blaupunkt Serial Number, removing the radio is a necessary step. Like other radios, you will need a prying tool and a screwdriver for prying the panels from the dash and unscrewing the screws. If you find it difficult, watch the video for a guide on how to remove your radio.

If the radio has been removed you will need to locate the radios label, which is on the top or side of the radios casing. In the example photos, we have highlighted the required information.